PRO400PCEL Programmable Benchtop Homogenizer (Extra Length)

PRO400PCEL Programmable Benchtop Homogenizer (Extra Length)
Distributor & Service Provider In India

The 400PCEL Programmable Benchtop Homogenizer Unit has the same perfect balance of power and superior performance as the PRO400PC. However, the EL version offers an Extra Long stand height, which provides a total of 31 inches of length for a taller container (standard unit height is 14.5 inches).

It is a powerful programmable unit that is designed to run repetitive homogenizing in your laboratory or industrial setting with a minimum of operator attention. It can be programmed either from the unit's keypad, or from your own laptop or desktop computer (serial communication mode RS232) with the included PROgrammable® software. An infinite number of programs can be created and stored, each consisting of up to 23 unique cycles defining speed, run time and pause between each cycle. At any point, the PC-Series homogenizer can be overridden and manual control resumed.

PRO PC homogenizer units meet industry requirements for verification of processing and documentation maintenance. As homogenization proceeds, data can be graphed on the computer screen. Both the programs and the data collected (set time and set speed versus actual time and actual speed) can be stored and recalled for screen display or printout. Requires a generator probe or chamber assembly to use.

With a sample volume range capability from microliters to multi-liters, it demonstrates enormous processing versatility, which is designed to homogenize, emulsify, blend, and/or mix organic and inorganic materials. It comes with a Extra Length PRO TRAC stand, which is a motorized stand developed by PRO Scientific, providing an effortless, accurate, and smooth motor position.

PRO Scientific can provide an end-user the sheer numbers based on using our units and generator probes, so you will know exactly at what speeds/time to run PRO homogenizing equipment.

Please Note: Viscous samples will reduce max capacity. Adding a Deflector Head to your Generator Probe will facilitate movement of your sample during homogenization and help increase max volume homogenization.

*Higher volumes dependent on viscosity.

• Powerful programmable homogenizer unit
• Extra Length stand for taller containers
• Computer interface capability
• Create an infinite number of programs
• Recall individual data for various cycles
• Powerful 1305 high watt motor
• Homogenize, emulsify, blend, and/or mix
• Large processing range, 0.05ml to 30L*
• Motorized PRO TRAC stand
• Made in the USA with a 2 Year Warranty
• Generator probe not included