A multipurpose water maker
Lab-Q water maker produces Type I ultrapure water and Type II pure water simultaneously. The produced water has very low total organic carbon (TOC) content, meeting the requirements of liquid chromatography and all spectroscopy methods, besides microbiological and molecular biology application. It also meets ISO 3696, Type I Standards. Dispensing of ultrapure water is configured on the front panel whereas pre water is dispensed from the storage tank. For feed water with higher level of TDS i.e. > 500 ppm a customised pre treatment module can be designed prior to INDION Lab-Q Ultra.
Feed Water Specifications
Configuration | 10 LPH |
TDS | 500 ppm (max) |
Fe, Mn | Nil |
Free Chlorine | Nil |
Silica | < 20 ppm |
Inlet Pressure | Min 0.5 kg/cm² & Max 2.0 kg/cm² |
Product Specifications
Configuration | 10 LPH |
Dimensions W x D x H (in mm) | 450 x 250 x 500 |
Storage Tank Dimensions W x D x H (in mm) | 300 x 250 x 500 |
Weight | 13 kgs |
Power Requirement | 230 V AC ± 10% |
Power Consumption | 80 Watts |
Product Water Specifications
ASTM Type 2 Water | ASTM Type 1 Water | |
Flow rate | 10 LPH | 1 - 1.5 l/min |
Conductivity | <0.1 μS/cm | 0.054 μS/cm |
Resistivity | 10 MΩ.cm | 18.2 MΩ.cm |
Total Organic Carbon (TOC) | <30 ppb | <5 ppb* |
Endotoxin Level | NA | <0.25 Eu/ml |
Particle > 0.22 μm | NA | < 1 per ml |
Bacteria | NA | <1cfu/ml |
Note: * Performance parameters achieved when water dispensed through final point of use 0.22 μ
* TOC values achieved with feed water of less than 50 ppb